• BE1 300 - BE1 399: BE1 500 - BE1 599: BE1 700 - BE1 799: BE1 900 - BE1 999: Ontario Bus License Plates.
  • Item 3 BASLER Electric BE1-700 E0N2X1N Digital Protective Relay 2 - BASLER Electric BE1-700 E0N2X1N Digital Protective Relay. $854.84 +$25.87 shipping. About this item. An item in excellent, new condition with no wear. The item may be missing the original packaging or protective wrapping, or may be in the original.

The BE1-700V is a compact multifunction numeric relay that provides phase, zero sequence, and negative sequence voltage protection includingover and under frequency, plus control and metering functions in an integrated system. Four shot reclosing with separate Pilot Initiate is.

Design Features

  • Attains single-digit, micron-level accuracy throughout the field of view
  • Improves thermal stability significantly with optical feedback technology
  • Delivers industry-best resolution of >24 bits when used with Aerotech’s GCL controller
  • Includes wide range of apertures and focal lengths
  • Offers many choices of mirror surface treatments for a variety of laser wavelengths

Calibrate Micron-Level Accuracy, Count on Ultimate Stability

With AGV-HP(O), which offers the highest level of accuracy of any laser scanner, you’ll produce consistent parts with smaller, more precise features. The AGV HP(O)’s highly repeatable and thermally stable feedback sensors can be calibrated down to single-digit, micron-level accuracy over the field of view (see figure below). With the extremely low thermal gain drift performance of the position transducers, complex, high-density laser machining applications that take long periods of time to complete will maintain consistent micron-level feature placement accuracy over the lifetime of the process. Likewise, high-throughput applications will maintain consistent part-to- part quality without having to re-calibrate between parts. For the highest level of thermal stability, the AGV-HP(O) scanners can be equipped with water cooling to stabilize the operating temperature of the device under varying loads, changes in ambient temperature or beam clipping on the input aperture.B17001

Real-Time Process Visibility

The location of the AGV-HP(O) mirrors can be captured and analyzed in real time. With direct access to the scanner positions, you won’t need to program delay parameters to compensate for lag and tracking errors in the servo system. The process can be optimized prior to marking the part, saving you time and reducing material waste. You can also control the state of the laser based on in-position and velocity criteria, further reducing programming complexity.

Advanced Programming Features

The AGV-HP(O) uses all the advanced motion and position synchronized output (PSO) capabilities that Aerotech has developed for traditional servo-based laser processing applications. Contouring functions, such as acceleration limiting, can be used to automatically reduce speeds in tight corners or small radii to minimize overshoot. The laser can be triggered based on the position feedback of the mirrors with PSO to ensure consistent spot overlap as the scanner changes speed. Aerotech’s Infinite Field of View (IFOV) function seamlessly combines servo and scanner motion to extend the marking capability of the scanner across the entire travel of the servo stages, eliminating stitching errors that can occur in a more traditional move-expose-repeat process.

Design Choices

The AGV-HP(O) family is available with 10, 14, 20 and 30 mm input apertures and can be equipped with an F-Theta or telecentric lens directly from Aerotech. Users can also acquire the focusing optic directly from a trusted supplier, with Aerotech supplying a spacer ring to ensure that back reflections through the optic do not damage the scanner mirrors. Mirror coatings for a wide range of UV, visible, IR and CO2 wavelengths are supported. Coatings optimized for ultra-fast lasers are also available.

Mechanical Specifications

ModelAGV10HP(O)AGV14HP(O)AGV20HP(O)AGV30HP(O)
Optical Performance
Beam Aperture10 mm14 mm20 mm30 mm
Maximum Scan Angle±20°
Beam Displacement12.6 mm16.5 mm23.2 mm35.7 mm
Feedback Resolution0.012 µrad (25 bit)
Dither (Min. Incremental Motion)(2)0.4 µradRMS
Accuracy50 µrad pk-pk
Repeatability(3)0.4 µradRMS
Gain Error0.05 mrad
Non-Linearity0.005%
Dynamic Performance
Tracking Error0 µsec
Peak Acceleration(4,5)288,000 m/s2224,000 m/s280,000 m/s256,000 m/s2
Continuous Acceleration(4, 6)75,200 m/s256,000 m/s220,800 m/s219,200 m/s2
Positioning Speed(4)75 m/s75 m/s50 m/s20 m/s
Marking Speed(4, 7, 8)5 m/s5 m/s5 m/s5 m/s
Jump & Settle Time, 1 mm Move(4, 9)270 µsec270 µsec450 µsec700 µsec
Stability
Long-Term Drift(3)Offset10 µrad/12 hrs
15 µrad/24 hrs
Gain10 ppm/24 hrs
Thermal DriftOffset10 µrad/°C
Gain1 ppm/°C
Mechanical Specifications
Mass-HP4.1 kg4.4 kg5.1 kg5.8 kg
-HPO2.5 kg2.6 kg2.9 kg3.1 kg
MaterialAluminum (Black Anodize and Blue Paint)
MTBF (Mean Time Between Failure)20,000 Hours

Notes:
1. All angles are optical unless otherwise specified.
2. Without -AC air cooling option.
3. After initial 3 hour warm-up, ambient temperature variation < ±0.5 deg.
4. Typical performance with f = 160mm F-Theta objective.
5. Based on maximum rated current of the motor.
6. Based on rated rms current of the motor with -WC water cooling option; maximum continuous acceleration is 70% of this value without water cooling.
7. Achievable with <1% velocity error over continuous velocity portion of move.
8. Marking speed is dependent on allowable tracking error.
9. Settled to within 1% of move distance.
10. All specifications are per axis unless otherwise noted.

Electrical Specifications

ModelAGV10HP(O)AGV14HP(O)AGV20HP(O)AGV30HP(O)
Drive SystemBrushless Direct-Drive Galvano Motor
FeedbackNoncontact Rotary Encoder
Maximum Bus Voltage±40 VDC
Limit SwitchesOptical limit switches and software limits
Home SwitchAt Center

AGV-HP(O) Series Galvanometer Scanner

B17001e1

OptionDescription
AGV10HP(O)2-axis galvanometer scanner with 10 mm diameter beam aperture and integral high-precision feedback
AGV14HP(O)2-axis galvanometer scanner with 14 mm diameter beam aperture and integral high-precision feedback
AGV20HP(O)2-axis galvanometer scanner with 20 mm diameter beam aperture and integral high-precision feedback
AGV30HP(O)2-axis galvanometer scanner with 30 mm diameter beam aperture and integral high-precision feedback

Housing Type (Required)

OptionDescription
-Closed scanner housing (AGVxxHP)
OOpen scanner housing (AGVxxHPO)
Note: -BE2 is not available with AGV30HP or AGV30HPO.

Beam Entry (Required)

OptionDescription
-BE1Right-side laser beam entry (standard)
-BE2Left-side laser beam entry

Wavelength of Mirror Coating (Required)

-W00110.6 µm
-W002Durable-Silver (450 nm - 10.6 µm)
-W0031552 nm
-W0041064 nm
-W0051030 nm
-W006532 nm
-W007515 nm
-W008355 nm
-W009343 nm
-W0129.3 µm

Note: Custom coatings available. Contact factory for details.

F-Theta Lenses Available (Optional)(1, 2)

OptionDescription
-LxxSee Table 1: F-Theta Lenses Available

Mounting Plate (Optional)

OptionDescription
-MPMounting plate

Note: -MP option is only available with closed scanner housing (AGVxxHP) models.

Air Cooling (Optional)

OptionDescription
-ACAir cooling

Water Cooling (Optional)

OptionDescription
-WCWater cooling

Performance Grade (Required)

OptionDescription
-PL0Standard performance grade
-PL9Ultra performance grade

Integration (Required)

Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.

OptionDescription
-TASIntegration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
-TACIntegration - Test as components
Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system.

Lens Mounting Adapters (to be ordered as separate line item)

OptionDescription
LM10HP-XXXLens mount adapter for AGV10HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request
LM14HP-XXXLens mount adapter for AGV14HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request
LM20HP-XXXLens mount adapter for AGV20HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request
LM30HP-XXXLens mount adapter for AGV30HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request

Table 1: F-Theta Lenses Available (Optional)(1, 2)

AGV10HP(O)
AGV14HP(O)
AGV20HP(O)AGV30HP(O)
-L11552-100-T
55 mm sq. FOV
-10600-100-T
35 mm sq. FOV
10600-255
100 mm sq. FOV
-L21552-163-T
90 mm sq. FOV
-10600-160
75 mm sq. FOV
1064-200
65 mm sq. FOV(4)
-L31064-100
65 mm sq. FOV(4)
1552-100-T
45 mm sq. FOV
10600-255
160 mm sq. FOV
1064-255
150 mm sq. FOV(4)
-L41064-255
150 mm sq. FOV(4)
1552-163-T
90 mm sq. FOV
1064-100-T
40 mm sq. FOV
1064-500
230 mm sq. FOV(4)
-L51064-160
105 mm sq. FOV(4)
1064-100
35 mm sq. FOV(4)
1064-163
70 mm sq. FOV(4)
-
-L61064-163-T
90 mm sq. FOV
1064-100-T
60 mm sq. FOV(4)
1064-163-T
70 mm sq. FOV
-
-L71030-100-T
40 mm sq. FOV
1064-160
80 mm sq. FOV(4)
1064-255
150 mm sq. FOV(4)
-
-L81030-163-T
90 mm sq. FOV
1064-163-T
85 mm sq. FOV
532-255
145 mm sq. FOV(4)
-
-L9532-100
55 mm sq. FOV(4)
1064-170
110 mm sq. FOV(4)
--
-L10532-100-T
60 mm sq. FOV(4)
1030-100-T
30 mm sq. FOV
--
-L11532-160
105 mm sq. FOV(4)
1030-163-T
90 mm sq. FOV
--
-L12532-163-T
75 mm sq. FOV
532-100-T
60 mm sq. FOV(4)
--
-L13515-100-T
40 mm sq. FOV
532-160
105 mm sq. FOV(4)
--
-L14515-163-T
40 mm sq. FOV
532-163-T
75 mm sq. FOV
--
-L15355-53-T
15 mm sq. FOV
532-170
100 mm sq. FOV(4)
--
-L16355-100-T
50 mm sq. FOV
515-100-T
40 mm sq. FOV
--
-L17355-160
90 mm sq. FOV
515-163-T
40 mm sq. FOV
--
-L18355-163-T
80 mm sq. FOV
355-53-T
5 mm sq. FOV
--
-L19355-255
140 mm sq. FOV
355-163-T
80 mm sq. FOV
--
-L20-355-255
140 mm sq. FOV
--
-L21-343-53-T
5 mm sq. FOV
--
-L22-343-163-T
70 mm sq. FOV
--
-L23-343-255
115 mm sq. FOV
--
Notes:
1. Lenses specified as XXX-YYY(-T), where “XXX” represents the wavelength in nanometers, “YYY” represents the focal length in millimeters, and the presence of “-T” indicates a telecentric design.
2. Input beam diameter is assumed to be equal to scan head entrance aperture at 1/e^2 Gaussian profile.
3. Reported field-of-view (FOV) sizes are approximate and may be subject to minor variation as a function of the application’s laser and optical paramterers.
Contact factory for details.
4. Certain F-theta lenses are not recommended for use with short-pulse lasers (picosecond and femtosecond pulse durations). Contact factory for alternate lens options that are
compatible with short-pulse lasers.
5. Custom lenses available. Contact factory for details.

Design Features

  • Attains single-digit, micron-level accuracy throughout the field of view
  • Improves thermal stability significantly with optical feedback technology
  • Delivers industry-best resolution of >24 bits when used with Aerotech’s GCL controller
  • Includes wide range of apertures and focal lengths
  • Offers many choices of mirror surface treatments for a variety of laser wavelengths

Calibrate Micron-Level Accuracy, Count on Ultimate Stability

With AGV-HP(O), which offers the highest level of accuracy of any laser scanner, you’ll produce consistent parts with smaller, more precise features. The AGV HP(O)’s highly repeatable and thermally stable feedback sensors can be calibrated down to single-digit, micron-level accuracy over the field of view (see figure below). With the extremely low thermal gain drift performance of the position transducers, complex, high-density laser machining applications that take long periods of time to complete will maintain consistent micron-level feature placement accuracy over the lifetime of the process. Likewise, high-throughput applications will maintain consistent part-to- part quality without having to re-calibrate between parts. For the highest level of thermal stability, the AGV-HP(O) scanners can be equipped with water cooling to stabilize the operating temperature of the device under varying loads, changes in ambient temperature or beam clipping on the input aperture.

Real-Time Process Visibility

The location of the AGV-HP(O) mirrors can be captured and analyzed in real time. With direct access to the scanner positions, you won’t need to program delay parameters to compensate for lag and tracking errors in the servo system. The process can be optimized prior to marking the part, saving you time and reducing material waste. You can also control the state of the laser based on in-position and velocity criteria, further reducing programming complexity.

Advanced Programming Features

The AGV-HP(O) uses all the advanced motion and position synchronized output (PSO) capabilities that Aerotech has developed for traditional servo-based laser processing applications. Contouring functions, such as acceleration limiting, can be used to automatically reduce speeds in tight corners or small radii to minimize overshoot. The laser can be triggered based on the position feedback of the mirrors with PSO to ensure consistent spot overlap as the scanner changes speed. Aerotech’s Infinite Field of View (IFOV) function seamlessly combines servo and scanner motion to extend the marking capability of the scanner across the entire travel of the servo stages, eliminating stitching errors that can occur in a more traditional move-expose-repeat process.

Design Choices

The AGV-HP(O) family is available with 10, 14, 20 and 30 mm input apertures and can be equipped with an F-Theta or telecentric lens directly from Aerotech. Users can also acquire the focusing optic directly from a trusted supplier, with Aerotech supplying a spacer ring to ensure that back reflections through the optic do not damage the scanner mirrors. Mirror coatings for a wide range of UV, visible, IR and CO2 wavelengths are supported. Coatings optimized for ultra-fast lasers are also available.

Mechanical Specifications

ModelAGV10HP(O)AGV14HP(O)AGV20HP(O)AGV30HP(O)
Optical Performance
Beam Aperture10 mm14 mm20 mm30 mm
Maximum Scan Angle±20°
Beam Displacement12.6 mm16.5 mm23.2 mm35.7 mm
Feedback Resolution0.012 µrad (25 bit)
Dither (Min. Incremental Motion)(2)0.4 µradRMS
Accuracy50 µrad pk-pk
Repeatability(3)0.4 µradRMS
Gain Error0.05 mrad
Non-Linearity0.005%
Dynamic Performance
Tracking Error0 µsec
Peak Acceleration(4,5)288,000 m/s2224,000 m/s280,000 m/s256,000 m/s2
Continuous Acceleration(4, 6)75,200 m/s256,000 m/s220,800 m/s219,200 m/s2
Positioning Speed(4)75 m/s75 m/s50 m/s20 m/s
Marking Speed(4, 7, 8)5 m/s5 m/s5 m/s5 m/s
Jump & Settle Time, 1 mm Move(4, 9)270 µsec270 µsec450 µsec700 µsec
Stability
Long-Term Drift(3)Offset10 µrad/12 hrs
15 µrad/24 hrs
Gain10 ppm/24 hrs
Thermal DriftOffset10 µrad/°C
Gain1 ppm/°C
Mechanical Specifications
Mass-HP4.1 kg4.4 kg5.1 kg5.8 kg
-HPO2.5 kg2.6 kg2.9 kg3.1 kg
MaterialAluminum (Black Anodize and Blue Paint)
MTBF (Mean Time Between Failure)20,000 Hours

Notes:
1. All angles are optical unless otherwise specified.
2. Without -AC air cooling option.
3. After initial 3 hour warm-up, ambient temperature variation < ±0.5 deg.
4. Typical performance with f = 160mm F-Theta objective.
5. Based on maximum rated current of the motor.
6. Based on rated rms current of the motor with -WC water cooling option; maximum continuous acceleration is 70% of this value without water cooling.
7. Achievable with <1% velocity error over continuous velocity portion of move.
8. Marking speed is dependent on allowable tracking error.
9. Settled to within 1% of move distance.
10. All specifications are per axis unless otherwise noted.

Electrical Specifications

ModelAGV10HP(O)AGV14HP(O)AGV20HP(O)AGV30HP(O)
Drive SystemBrushless Direct-Drive Galvano Motor
FeedbackNoncontact Rotary Encoder
Maximum Bus Voltage±40 VDC
Limit SwitchesOptical limit switches and software limits
Home SwitchAt Center

AGV-HP(O) Series Galvanometer Scanner

OptionDescription
AGV10HP(O)2-axis galvanometer scanner with 10 mm diameter beam aperture and integral high-precision feedback
AGV14HP(O)2-axis galvanometer scanner with 14 mm diameter beam aperture and integral high-precision feedback
AGV20HP(O)2-axis galvanometer scanner with 20 mm diameter beam aperture and integral high-precision feedback
AGV30HP(O)2-axis galvanometer scanner with 30 mm diameter beam aperture and integral high-precision feedback

Housing Type (Required)

OptionDescription
-Closed scanner housing (AGVxxHP)
OOpen scanner housing (AGVxxHPO)
Note: -BE2 is not available with AGV30HP or AGV30HPO.

Beam Entry (Required)

OptionDescription
-BE1Right-side laser beam entry (standard)
-BE2Left-side laser beam entry

Wavelength of Mirror Coating (Required)

-W00110.6 µm
-W002Durable-Silver (450 nm - 10.6 µm)
-W0031552 nm
-W0041064 nm
-W0051030 nm
-W006532 nm
-W007515 nm
-W008355 nm
-W009343 nm
-W0129.3 µm

Note: Custom coatings available. Contact factory for details.

F-Theta Lenses Available (Optional)(1, 2)

OptionDescription
-LxxSee Table 1: F-Theta Lenses Available

Mounting Plate (Optional)

OptionDescription
-MPMounting plate

Note: -MP option is only available with closed scanner housing (AGVxxHP) models.

Air Cooling (Optional)

OptionDescription
-ACAir cooling

Water Cooling (Optional)

B1700hsd

OptionDescription
-WCWater cooling

Performance Grade (Required)

OptionDescription
-PL0Standard performance grade
-PL9Ultra performance grade

Integration (Required)

Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.

OptionDescription
-TASIntegration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
-TACIntegration - Test as components
Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system.

Lens Mounting Adapters (to be ordered as separate line item)

OptionDescription
LM10HP-XXXLens mount adapter for AGV10HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request
LM14HP-XXXLens mount adapter for AGV14HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request
LM20HP-XXXLens mount adapter for AGV20HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request
LM30HP-XXXLens mount adapter for AGV30HP(O); standard versions support the lens configurations offered by Aerotech; custom versions available on request

Table 1: F-Theta Lenses Available (Optional)(1, 2)

AGV10HP(O)
AGV14HP(O)
AGV20HP(O)AGV30HP(O)
-L11552-100-T
55 mm sq. FOV
-10600-100-T
35 mm sq. FOV
10600-255
100 mm sq. FOV
-L21552-163-T
90 mm sq. FOV
-10600-160
75 mm sq. FOV
1064-200
65 mm sq. FOV(4)
-L31064-100
65 mm sq. FOV(4)
1552-100-T
45 mm sq. FOV
10600-255
160 mm sq. FOV
1064-255
150 mm sq. FOV(4)
-L41064-255
150 mm sq. FOV(4)
1552-163-T
90 mm sq. FOV
1064-100-T
40 mm sq. FOV
1064-500
230 mm sq. FOV(4)
-L51064-160
105 mm sq. FOV(4)
1064-100
35 mm sq. FOV(4)
1064-163
70 mm sq. FOV(4)
-
-L61064-163-T
90 mm sq. FOV
1064-100-T
60 mm sq. FOV(4)
1064-163-T
70 mm sq. FOV
-
-L71030-100-T
40 mm sq. FOV
1064-160
80 mm sq. FOV(4)
1064-255
150 mm sq. FOV(4)
-
-L81030-163-T
90 mm sq. FOV
1064-163-T
85 mm sq. FOV
532-255
145 mm sq. FOV(4)
-
-L9532-100
55 mm sq. FOV(4)
1064-170
110 mm sq. FOV(4)
--
-L10532-100-T
60 mm sq. FOV(4)
1030-100-T
30 mm sq. FOV
--
-L11532-160
105 mm sq. FOV(4)
1030-163-T
90 mm sq. FOV
--
-L12532-163-T
75 mm sq. FOV
532-100-T
60 mm sq. FOV(4)
--
-L13515-100-T
40 mm sq. FOV
532-160
105 mm sq. FOV(4)
--
-L14515-163-T
40 mm sq. FOV
532-163-T
75 mm sq. FOV
--
-L15355-53-T
15 mm sq. FOV
532-170
100 mm sq. FOV(4)
--
-L16355-100-T
50 mm sq. FOV
515-100-T
40 mm sq. FOV
--
-L17355-160
90 mm sq. FOV
515-163-T
40 mm sq. FOV
--
-L18355-163-T
80 mm sq. FOV
355-53-T
5 mm sq. FOV
--
-L19355-255
140 mm sq. FOV
355-163-T
80 mm sq. FOV
--
-L20-355-255
140 mm sq. FOV
--
-L21-343-53-T
5 mm sq. FOV
--
-L22-343-163-T
70 mm sq. FOV
--
-L23-343-255
115 mm sq. FOV
--
Notes:

B1700


1. Lenses specified as XXX-YYY(-T), where “XXX” represents the wavelength in nanometers, “YYY” represents the focal length in millimeters, and the presence of “-T” indicates a telecentric design.
2. Input beam diameter is assumed to be equal to scan head entrance aperture at 1/e^2 Gaussian profile.
3. Reported field-of-view (FOV) sizes are approximate and may be subject to minor variation as a function of the application’s laser and optical paramterers.
Contact factory for details.
4. Certain F-theta lenses are not recommended for use with short-pulse lasers (picosecond and femtosecond pulse durations). Contact factory for alternate lens options that are

Basler Be1-700


Be1-700c

compatible with short-pulse lasers.

Be1-700v Manual

5. Custom lenses available. Contact factory for details.